| |
|
Blank Flush Plate WHITE A separate back plate and cover, allowing cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware and screw centers, making it perfect for easy flush installation on gyprock or fibro cavity walls. Dimensions 116(W) x 75(H) x 13(D)mm.
More Info
Manufacturer: 4Cabling Seller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
More Info
Manufacturer: Electric VisualSeller: eBay.com.au
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Blanking Plate The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers. Dimensions 116(W) x 75(H) x 13(D)mm.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
15 Amp RegulatorThis is state of the art technology offered to you at a super discounted price. This 5A solar charge controller can be used to convert 100% FREE solar energy into electricity you can use. ( with Solar Module Panel ) Users can enjoy free electricity in homes while travelingRVs, boats, ATVs, Cars, battery charging, gardens, remote locations where electricity is not available etc.These controllers basically pay for themselves as time goes by. Use these to in part to build complete on grid and off grid solar power generating systems. ( Ideal for deep cycle battery banks ) Do your part in your community by using clean and re-new able energy, free electricity is available to everyone now. Don’t miss this bargain. Electrical Data15A ( 12V / 24V ) SUITABLE UP TO 144 WATT on 12V SUITABLE UP TO 250 WATT on 24V Mechanical DataOVERLOADING PROTECTION SHORT CIRCUIT PROTECTION OVERLOADING PROTECTION REVERSE CURRENT PROTECTION REVERSE POLARITY PROTECTION THUNDER PROTECTION OVER DISCHARGE PROTECTION AUTO CHARGE SHUT OFF LVD OVER-CHARGE PROTECTION (AUTO STOP) BATTERY CAPACITY LEVEL DISPLAY INTELLIGENT TEMPERATURE COMPENSATION Warranty 2 YEARS
More Info
Manufacturer: Seller: LHP.NET.AU
|
(Out of stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
4 x Size Sub C Ni-MH Rechargeable BatteriesBrand new in sealed 4 piece pack. Ultra High 5000 mAh capacity. Voltage 1.2V. Environmentally friendly. No Mercury, Cadmium or Lead. Saves Money. Cost less than 1c per charge cycle. Recharge up to 1000 times. No Memory effect - No need to fully discharge. Ideal for making various battery packs for heavy duty applications such as remote control (RC) toys, electrical guns, power tools and backups. Solderable tabs enable cost effective and easy way to make your own power pack of different voltages and shapes.
More Info
Manufacturer: VapexTechSeller: Electronics Warehouse
|
(Out of stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Quality 10W Solar Panel features high efficiency and high performance great for mobile or fixed use. The Solar cell delivers a conversion efficiency of 18.9% and the panel’s reduced voltage temperature coefficient and exceptional low-light performance attributes provide outstanding energy delivery per peak power watt, Great for charging Batteries and maintaining a charge to a battery on standby.Infomonusa design, manufactures and delivers high-performance solar electric technology worldwide. Their high efficiency solar cells generate up to 50% more power than conventional solar cells. Electrical DataPeak Power (+/- 5%): 10wRated Voltage: 12 VRated Current: .49 AOpen Circuit Voltage: 18.5 VMaximum System Voltage: 1000VDiode Protection Fitted Mechanical DataFront Glass: 3.2 mm (1/8 in) temperedJunction Box: IP-65 rated with diodeOutput Cables: 900mm length cable / Multi-contactFrame: Anodized aluminium alloy typeWeight: 5kg Tested Operating ConditionsTemperature: -40°C to + 85°CImpact Resistance: Hail – 25mm (1 in) at 23m/s (52 mph) WarrantyWarranty: 25 years power warranty
More Info
Manufacturer: Seller: LHP.NET.AU
|
(Out of stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
More Info
Manufacturer: Electric VisualSeller: eBay.com.au
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
250 Watt Solar PanelQuality 250W Solar Panel features high efficiency and high performance great for mobile or fixed use. The Solar cell delivers a conversion efficiency of 18% and the panel’s reduced voltage temperature coefficient and exceptional low-light performance attributes provide outstanding energy delivery per peak power watt, Great for Caravans, Boats, Camping, Add to existing Home solar systems etc New modern high-performance solar electric technology. Their high efficiency solar cells are compact and generate up to 50% more power than conventional solar cells. Electrical DataPeak Power (+/- 5%)Rated Voltage: 24 V Rated Current: 7.0 AOpen Circuit Voltage: 36 VMaximum System Voltage: 1000VDiode Protection Fitted Mechanical DataFront Glass: 3.2 mm (1/8 in) temperedJunction Box: IP-65 rated with diodeFrame: Anodized aluminium alloy type Tested Operating ConditionsTemperature: -40°C to + 85°CImpact Resistance: Hail – 25mm (1 in) at 23m/s (52 mph) WarrantyWarranty: 25 years power warranty
More Info
Manufacturer: Seller: LHP.NET.AU
|
(Out of stock)
|
|
| |
|
2x 200 Watt Solar Panel TOTAL 400 Watts2x Quality 200W Solar Panel features high efficiency and high performance great for mobile or fixed use. The Solar cell delivers a conversion efficiency of 18% and the panel’s reduced voltage temperature coefficient and exceptional low-light performance attributes provide outstanding energy delivery per peak power watt, Great for Caravans, Boats, Camping, Add to existing Home solar systems etc New modern high-performance solar electric technology. Their high efficiency solar cells are compact and generate up to 50% more power than conventional solar cells. Electrical DataPeak Power (+/- 5%)Rated Voltage: 24 V Rated Current: 5.56 AOpen Circuit Voltage: 36 VMaximum System Voltage: 1000VDiode Protection Fitted Mechanical DataFront Glass: 3.2 mm (1/8 in) temperedJunction Box: IP-65 rated with diodeFrame: Anodized aluminium alloy type Tested Operating ConditionsTemperature: -40°C to + 85°CImpact Resistance: Hail – 25mm (1 in) at 23m/s (52 mph) WarrantyWarranty: 25 years power warranty
More Info
Manufacturer: Seller: LHP.NET.AU
|
(Out of stock)
|
|
| |
|
Minature Circuit Breaker - 6KA 1Pole 10Amp This 6kA MCB has been developed to provide high quality, realiable circuit protection with exceptional cost benefits. Mainly suitable for overload and short circuit protection. It can also be used for an unfrequented switch over of the circuit and illumination under normal conditions. We use quality German Tri-metal components making our MCB's extremely reliable. It is designed for AC circuits 50/60 Hz, with a rated voltage of 240V for one pole and 415 Volts on the two and three pole models.  Standard DIN rail mounting, will fit standard electrical consumer units. Accepts pin / finger type busbar.  Approvals: Australian Standard: AS/NZS 60898.1:2004 Australian Approval C-Tick Approval International Standard IEC 60898 Circuit Breakers for overcurrent protection for household and similar installation Normal usage and mounting conditions  Technical Information: Ambient temperature the breaker can work under ambient temperature -5t - +40t Altitude: the breaker can work under altitude but not exceeding 2000m Class of pollution is class 2 Mounting type is mounting type III The breaker can be mounted in rail, horizontally or vertically environmental factors are considered in the design of this circuit breaker, with many recoverable and degradable materials 10 year warranty
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Minature Circuit Breaker - 6KA 2Pole 10Amp This 6kA MCB has been developed to provide high quality, realiable circuit protection with exceptional cost benefits. Mainly suitable for overload and short circuit protection. It can also be used for an unfrequented switch over of the circuit and illumination under normal conditions. We use quality German Tri-metal components making our MCB's extremely reliable. It is designed for AC circuits 50/60 Hz, with a rated voltage of 415 Volts on the two and three pole models.  Standard DIN rail mounting, will fit standard electrical consumer units. Accepts pin / finger type busbar.  Approvals: Australian Standard: AS/NZS 60898.1:2004 Australian Approval C-Tick Approval International Standard IEC 60898 Circuit Breakers for overcurrent protection for household and similar installation Normal usage and mounting conditions  Technical Information: Ambient temperature the breaker can work under ambient temperature -5t - +40t Altitude: the breaker can work under altitude but not exceeding 2000m Class of pollution is class 2 Mounting type is mounting type III The breaker can be mounted in rail, horizontally or vertically environmental factors are considered in the design of this circuit breaker, with many recoverable and degradable materials 10 year warranty
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Minature Circuit Breaker - 6KA 3Pole 10Amp This 6kA MCB has been developed to provide high quality, realiable circuit protection with exceptional cost benefits. Mainly suitable for overload and short circuit protection. It can also be used for an unfrequented switch over of the circuit and illumination under normal conditions. We use quality German Tri-metal components making our MCB's extremely reliable. It is designed for AC circuits 50/60 Hz, with a rated voltage of 415 Volts.  Standard DIN rail mounting, will fit standard electrical consumer units. Accepts pin / finger type busbar.  Approvals: Australian Standard: AS/NZS 60898.1:2004 Australian Approval C-Tick Approval International Standard IEC 60898 Circuit Breakers for overcurrent protection for household and similar installation Normal usage and mounting conditions  Technical Information: Ambient temperature the breaker can work under ambient temperature -5t - +40t Altitude: the breaker can work under altitude but not exceeding 2000m Class of pollution is class 2 Mounting type is mounting type III The breaker can be mounted in rail, horizontally or vertically environmental factors are considered in the design of this circuit breaker, with many recoverable and degradable materials 10 year warranty
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
|
|
Text 
Search: electrical supplies