| |
|
More Info
Manufacturer:  Seller: eBay.com.au
|
(In stock)
|
|
| |
|
Blank Flush Plate WHITE A separate back plate and cover, allowing cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware and screw centers, making it perfect for easy flush installation on gyprock or fibro cavity walls. Dimensions 116(W) x 75(H) x 13(D)mm.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
More Info
Manufacturer: PlatformSeller: eBay.com.au
|
(In stock)
|
|
| |
|
More Info
Manufacturer: PlatformSeller: eBay.com.au
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Blanking Plate The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers. Dimensions 116(W) x 75(H) x 13(D)mm.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
You need this primer sealer for a new concrete pools or "difficult surfaces" such as Marblesheen, Quartzon & Pebblecrete. Around 3 packs required for the average size pool. Note: This product is only sold with pool paint. Normally the calculation would run 1.5 packs of epoxy finish for 1 pack epoxy primer to achieve a 1 coat colour system. Or 3 packs epoxy finish for each pack of epoxy primer for a 2 coat colour system ( which would be the minimum that we’d recommend.)
More Info
Manufacturer: LuxapoolSeller: Direct Pool Supplies
|
(In stock)
|
|
| |
|
More Info
Manufacturer: Seller: eBay.com.au
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
|
(In stock)
|
|
| |
|
More Info
Manufacturer: Seller: eBay.com.au
|
(In stock)
|
|
| |
Results 1 - 20 of about 20
|
|
|
|
Text 
Search: paint supplies